The use of ultraviolet (UV) curing on dimensional and shaped objects continues to grow. UV cured coatings offer several advantages over solvent and/or water-borne coatings processed thermally or with IR. Line design, source placement and/or orientation, documentation of process limits and monitoring production conditions challenge users switching to UV curing technology. The 3DCURE® from EIT addresses these challenges in a simple, flexible and easy to use measurement system. The UV irradiance (W/cm²) and energy density (J/cm²) arriving at multiple points on the cure surface can be easily and simultaneously measured. The 3DCURE® Sensors can be easily mounted or attached at any critical point as needed, therefore avoiding repeated, time-consuming trials with a single radiometer in a single position. 3DCURE® saves your company time and money.